Compaq dc5800 - Microtower PC Hardware Reference Manual page 39

Hardware reference guide - dc5800 microtower model
Hide thumbs Also See for dc5800 - Microtower PC:
Table of Contents

Advertisement

7.
Release the drive by pulling the release tab away from the drive (1) and sliding the drive out of the
bay (2).
Figure 2-27
8.
Remove the four guide screws (two on each side) from the old drive. You will need these screws
to install a new drive.
ENWW
Removing a Hard Drive
Installing Additional Drives
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nv313ut#abaKa435ut

Table of Contents