Compaq dc5800 - Microtower PC Hardware Reference Manual page 36

Hardware reference guide - dc5800 microtower model
Hide thumbs Also See for dc5800 - Microtower PC:
Table of Contents

Advertisement

3.
Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until
the drive snaps into place.
Figure 2-23
4.
Connect the power and data cables to the drive as indicated in the following illustrations.
a.
If you are installing an optical drive, connect the power cable (1) and data cable (2) to the back
of the drive.
Figure 2-24
CAUTION:
A sharp bend can break the internal wires.
30
Chapter 2 Hardware Upgrades
Sliding the External Drives into the Drive Cage
Connecting the Optical Drive Cables
Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius.
ENWW

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nv313ut#abaKa435ut

Table of Contents