Smart Cover Lock - Compaq d338 - Microtower Desktop PC Management Manual

Desktop Management Guide
Setting the Smart Cover Sensor Protection Level
✎

Smart Cover Lock

Ä
✎
42
To set the Smart Cover Sensor protection level, complete the
following steps:
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart the Computer.
F10
2. Press the key as soon as the monitor light turns green. Press
Enter
to bypass the title screen, if necessary.
If you do not press the
the computer off, then on again, and press the
access the utility.
3. Select Security, then Smart Cover, and follow the instructions
on the screen.
4. Before exiting, click File > Save Changes and Exit.
The Smart Cover Lock is a software-controllable cover lock featured
on select HP computers. This lock prevents unauthorized access to
the internal components. Computers ship with the Smart Cover Lock
in the unlocked position.
CAUTION: For maximum cover lock security, be sure to establish a
setup password. The setup password prevents unauthorized access to the
Computer Setup utility.
The Smart Cover Lock is available as an option on select systems.
www.hp.com
F10
key at the appropriate time, you must turn
F10
key again to
Desktop Management Guide