Smart Cover Lock - Compaq d330 - Desktop PC Management Manual

Setting the Smart Cover Sensor Protection Level
✎

Smart Cover Lock

Ä
✎
Desktop Management Guide
To set the Smart Cover Sensor protection level, complete the
following steps:
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart the Computer.
2. When the F10 Setup message appears in the lower-right corner of
the screen, press the
screen, if necessary.
If you do not press the
must restart the computer to access the utility.
3. Select Security, then Smart Cover, and follow the instructions
on the screen.
4. Before exiting, click File > Save Changes and Exit.
The Smart Cover Lock is a software-controllable cover lock featured
on select HP computers. This lock prevents unauthorized access to the
internal components. Computers ship with the Smart Cover Lock in
the unlocked position.
CAUTION: For maximum cover lock security, be sure to establish a setup
password. The setup password prevents unauthorized access to the
Computer Setup utility.
The Smart Cover Lock is available as an option on select systems.
www.hp.com
F10 Enter
key. Press
F10
key while the message is displayed, you
Desktop Management Guide
to bypass the title
27