Dell PowerConnect 6024 User Manual page 346

Remove — When checked, removes the IP address from the OSPF area table.
Defining a New OSPF Area
1
Open the OSPF Areas page.
2
Click Add to display the Add an OSPF Area page.
3
Complete the fields in the dialog.
NOTE:
4
Click Apply Changes.
The new area is added to the OSPF area table.
Modifying OSPF Area Parameters
1
Open the OSPF Areas page.
2
Select an Area ID.
The parameters for the OSPF area display.
3
Modify the fields as desired.
4
Click Apply Changes.
The area parameters are modified and saved to the device.
Deleting an OSPF Area
1
Open the OSPF Areas page.
2
Click Show All to display the OSPF Area table.
3
Select an OSPF area and check the Remove check box.
4
Click Apply Changes.
The OSPF area is removed from the table, and the device is updated.
Defining OSPF Areas Using CLI Commands
The following table contains the CLI commands for defining OSPF areas.
Table 8-9. OSPF Area CLI Commands
CLI Command
router ospf area area-
id stub
router ospf area area-
id default-cost cost
356
Configuring Routing
The Stub Metric field is defined for Area Border routers.
Description
Defines an area as a stub area. To disable
this function, use the no form of this
command.
Specifies a cost for the default summary
route sent into a stub area.