Dell PowerConnect 6024 User Manual page 186

Modifying the RADIUS Server settings
1
Open the RADIUS Settings page.
2
Click Show All to display the RADIUS Servers List.
3
Modify the fields in the dialog.
4
Click Apply Changes.
The RADIUS Server settings are modified, and the device is updated.
Deleting a RADIUS Server for the RADIUS Servers List
1
Open the RADIUS Settings page.
2
Click Show All to display the RADIUS Servers List.
3
Select a RADIUS Server and check the Remove check box.
The RADIUS server is removed from the list.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed on the
RADIUS Settings page.
Table 6-38. RADIUS Server CLI Commands
CLI Command
radius-server timeout
timeout
radius-server
retransmit retries
radius-server deadtime
deadtime
radius-server key key-
string
radius-server host ip-
address [auth-port
auth-port-number ]
[timeout timeout]
[retransmit retries ]
[deadtime deadtime ]
[key key-string ]
[source source ]
[priority priority ]
show radius-servers
196
Configuring System Information
Description
Sets the interval for which a router waits for a
server host to reply.
Specifies the number of times the software
searches the list of RADIUS server hosts.
Configures unavailable servers to be skipped.
Sets the authentication and encryption key for
all RADIUS communications between the
router and the RADIUS environment.
Specifies a RADIUS server host.
Displays the RADIUS server settings.