2.
Review the system and storage configuration information to ensure the setup is correct. The system
information section includes the following information:
RAM
Boot controller
Boot controller disk size
PCI device information (collapsed by default)–only applicable for X2P migrations
If the boot controller disk size is zero or the controller is not supported, an error message appears under
PCI device information.
If a bootable drive is not configured on this system, see the
If the primary controller configured in your system is not supported by this version of the SMP application,
see the HP Insight Server Migration software for ProLiant Support Matrix for a complete list of supported
controllers for the destination server (only applicable for X2P migrations).
Configure the storage on this server to accommodate the data to be migrated from the source server.
38
Deploying SMP Agents
Post-migration
section in this guide.