Installing A Diskette, Cd-Rom, Dvd-Rom, Or Tape Drive - Compaq 141536-002 - Deskpro EN - MT RAMBUS Hardware Reference Manual

Installing a Diskette, CD-ROM, DVD-ROM, or Tape Drive

1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock and disable the Smart Cover Sensor.
2. Shut down the operating system properly, turn off the computer
and any external devices, disconnect the power cord from the
power outlet, and remove the computer cover.
3. Remove the bezel blank from the front bezel.
4. If you are installing a diskette drive, rotate the drive cage to the
upright position.
5. Install two guide screws on each side of the drive.


Some options use M3 metric thread hardware. Extra guide
screws are provided on the bottom of the chassis, next to the
power supply. The Compaq-supplied metric screws are black.
6. Install the drive in the desired drive bay by sliding it into the slots
and toward the front of the computer




Be sure the guide screws line up with the guide slots in the
drive cage.
Installing an Optional Drive (may vary)
.

Hardware Reference Guide 2-11