Compaq 141536-002 - Deskpro EN - MT RAMBUS Hardware Reference Manual page 10

2-2 Hardware Upgrades
3. Disconnect the power cord from the power outlet.
4. Loosen the retaining screw located on the back of the unit
5. Slide the cover latches on the sides near the back of the
computer .

6. Lift up the back of the access panel and pull it toward the back of
the unit about 1 inch (2.5 cm) so the tabs on the front of the access
panel clear the case

Removing the Access Panel


The configuration label located inside the computer cover
provides additional information.
Another label located inside the computer chassis provides
information about diagnosing computer conditions using the
power and hard drive LEDs.
. Lift the access panel up and off the unit.
.