Compaq 108164-003 - ProLiant - 800 Integration Notes page 6

Microsoft Small Business Server 2000 Installation Instructions for Compaq Prosignia and ProLiant Servers
Procedures
Downloading and
creating CSP for
Windows 2000 Smart
Components from the
Compaq website
(continued)
Using SmartStart Release 4.70 or Later to Create and Install CSP for
Windows 2000 Components
If you use Compaq SmartStart and Support Software CD-ROM Release 4.70 or later to create and
install the CSP for Windows 2000, refer to the procedures included in Table 6 and Table 7
respectively.
Table 6. Creating Compaq CSP for Windows 2000 using SmartStart release 4.70 CD-ROM or later
Procedures
Creating storage driver
diskette using the
SmartStart and Support
Software CD-ROM
145Z-0301B-WWEN
Steps
d. Click Download All Components.
10. Execute the CSP for Windows 2000 to update your operating system
with the latest Compaq drivers, agents, services, and utilities (go to
the specified download directory and double-click SETUP.EXE).
Steps
Note: You are only required to create the driver diskette for your primary
storage controller and network interface controller (NIC) if the Microsoft
SBS 2000 media does not contain the base driver.
1. Insert the SmartStart and Support Software CD-ROM into the CD-
ROM drive on a Microsoft Windows operating system.
2. Select the I Agree check box and click OK.
3. Select to Exit when the System Utilities interactive window appears.
4. Open Windows Explorer and explore the SmartStart and Support
Software CD-ROM contents.
5. Go to the CPQSUPSW\NTCSP directory and open the
BP0000XX.TXT file (where XX represents the bundle number).
6. Review "Section 3: Component Usage" of the text file to determine the
required Smart Component package for installing the driver for the
primary storage controller in your server.
7. Close the BP0000XX.TXT file once you have determined the
appropriate Smart Component and execute this Smart Component
from the same directory.
8. Select the option to Extract the driver to a temporary directory on your
server, and then close the Compaq Package Setup window. Go to this
temporary directory.
9. Execute the FLOPPY.BAT file to create the boot diskette containing
the appropriate driver files.
10. Set aside the diskette created for use during the installation of
Microsoft SBS 2000.
Note: You may also want to extract the driver for your NIC if Microsoft
SBS 2000 does not contain the base drivers for it.
6