Installing Windows; 64-Bit / Vista; Tm Tm; Tm / Vista Tm - ASROCK Vision HT Installation And Configuration Manual

2.3 Installing Windows

TM
Vista

64-bit With RAID Functions

If you want to install Windows
on your SATA HDDs with RAID functions, please follow below steps.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Configuration.
B. Set the option "SATA Mode" to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID
configuration.
Before you start to configure the RAID function, you need to
check the installation guide in the Support CD for proper
configuration. Please refer to the document in the Support CD,
"Guide to SATA Hard Disks Installation and RAID Configuration",
which is located in the folder at the following path:
.. \ RAID Installation Guide
STEP 3: Install Windows
OS on your system.
After the installation of Windows
manage RAID functions, you are allowed to use both "RAID Installation Guide" and "Intel
Rapid Storage Information" for RAID configuration. Please refer to the document in the
Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration", which is
located in the folder at the following path: .. \ RAID Installation Guide and the document
in the support CD, "Guide to Intel Rapid Storage", which is located in the folder at the
following path: .. \ Intel Rapid Storage Information
If you want to use "Intel Rapid Storage" in Windows
install "SATAII driver" from the Support CD again so that "Intel Rapid
Storage" will be installed to your system as well.
®

7 / 7 64-bit / Vista

® 7 / 7 64-bit / Vista
Advanced screen
® 7 / 7 64-bit / Vista
® 7 / 7 64-bit / Vista TM / Vista TM
6
TM /
TM / Vista TM 64-bit
SATA
TM / Vista TM 64-bit
64-bit OS, if you want to
® environment, please