Magnavox MDV455 - Dvd-video Player Owner's Manual page 11

MDV455_17x 11/11/03 4:34 PM
LEFT AUDIO IN
RIGHT AUDIO IN
VIDEO IN
Connect the yellow VIDEO jack of the DVD Player to the
1
corresponding VIDEO IN jack on your TV. Use the supplied video
cable, which has yellow markings.
Connect the supplied audio cable to the white and red Audio L/R
2
(left and right) jacks on the DVD Player and to the left/right AUDIO
IN jacks on the TV. Match the cable colors to the jack colors.
3 Plug the power cords of the DVD Player and the TV into an active
power outlet. Press STANDBY-ON y y on the front of the DVD
Player to turn it on.
Turn on the TV. Set it to the correct Video In channel. See your TV
4
owner's manual for details. Or, go to your lowest TV channel (01 or
02) and change channels downward until you see the DVD screen
saver on the TV.
Page 11
Connecting to a TV Only
TV has a yellow Video In jack
Back of TV
(example only)
2
LEFT AUDIO IN
RIGHT AUDIO IN
VIDEO IN
1
Hookups (cont'd) 11
3
Helpful Hints
• On the TV, the Video In jack is
usually yellow and might be
labeled video, CVBS, composite,
or baseband.
• If your TV has a single Audio In
jack instead of separate
left/right Audio In jacks, you will
need a different audio cable.
You need a "splitter" audio
cable to go from the Audio L/R
(left/right) jacks of the DVD
Player to the single Audio In
jack on your TV. See your
electronics retailer for details.