Post Drc, Dvd Player Defaults 41 - Magnavox MDV455 - Dvd-video Player Owner's Manual

MDV455_17x 11/11/03 4:34 PM
Post DRC
The Post DRC (Dynamic range control) compresses or softened the high
volume outputs and low volume outputs are brought upward to an audible
level.
Press SYSTEM MENU.
1
Press 1 or 2 to select Speaker Setup Page, press OK or 4.
2
Press 4 to select Post DRC, then press 2.
3
- - Speaker Setup Page - - - - Speaker Setup Page - -
Downmix Downmix
Post DRC Post DRC
EQ Type EQ Type
Reverb Mode Reverb Mode
Post DRC Auto Post DRC Auto
Press 3 to 4 to select On, Off or Auto, then press OK.
4
Choose 'On' to adjust smaller sound level output at the Audio Left
and Audio Right, Choose 'Off' to disable Post DRC or select 'Auto'
to adjust the dynamic level automatically according to the disc
record.
Press SYSTEM MENU to remove the menus.
5
DVD Player Defaults
To restore the original settings of the DVD Player, follow the steps below.
7
1 Press STOP twice to stop Disc playback completely.
Press SYSTEM MENU.
2
Press 2 to select the Preference Page, then press OK or 4.
3
Press 4 to select Default. Press 2 to select RESET, then press OK.
4
The original settings of the DVD Player will be restored.Then menus
will disappear automatically.
- - - - Preference Page Preference Page
Audio Audio
Subtitle Subtitle
Disc Menu
Disc Menu
Parental Parental
Password Password
Default Default
Load Factory Setting Load Factory Setting
Page 41

Post DRC, DVD Player Defaults 41

On On
Off Off
Auto Auto
- - - -
RESET RESET
1
Helpful Hint
• Restoring the Defaults will
reset the Player's menus to
English.
1,5
2-4
2
3,4