Table of Contents
Advertisement
Program Playback
You can play back the disc/card in your desired order.
1
In stop mode, press [MODE].
2
Use [K / L] to select a track / folder / file, then
press [OK].
1
2
3
- - / 16
Program
CD_DA
8
0:36
9
1:14
10
0:45
11
0:50
0:53
12
13
0:20
14
0:54
Page Up
Page Down
e.g.) audio CD
1
audio CD
:
Track information
JPEG
:
File information
audio CD
:
"CD-DA" will be displayed.
2
JPEG
:
Current Disc, SD Memory Card,
or folder name will be displayed.
3
Track / Folder /
: Track / Folder / File list in the
File list
original order.
Programmed list : Track / File list in the
4
programmed order.
Cumulative playback time of all tracks in the
5
programmed list.(audio CD only)
6
Playback status
Current page / Total page number
7
Operation Guide: Press [RED] to go to the previous
8
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the next
page in the programmed list.
• For JPEG files, use [K / L] to select a folder, then press
[OK] first, and then use [K / L] to select a file, then
press [OK].
• Press [CLEAR] to erase the last file of the program.
• Use [K / L] to select "All Clear" at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the right
hand screen.
• Use [s / B] to go back / forward between the
hierarchy of folders.
24
PLAYBACK
4
5
6
0 : 26 : 24
Total
2
1:14
4
0:50
9
1:14
11
0:50
0:53
12
14
0:54
8
0:36
7
8
Page Prev
Page Next
3
Press [B (play)] to start program playback.
• The program playback will start.
0 : 01 : 05
2 / 16
Program
CD_DA
2
1:14
4
0:50
9
1:14
11
0:50
12
0:53
14
0:54
8
0:36
Page Down
To exit from the program playback mode:
• Press [RETURN] in stop mode.
Note
• During program playback, press [C (stop)] once to
set the resume point, and then press [B (play)] to
resume program playback from where [C (stop)]
was pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (JPEG).
• During program playback, press [C (stop)] twice to
display the program screen. To go back to the normal
program playback, press [RETURN] to exit from the
program screen, then press [B (play)].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program, press
[REPEAT] repeatedly until "
during playback. To repeat the entire program, press
[REPEAT] repeatedly until "
playback.
• Playback from a desired track / file and random
playback are not available during program playback.
• Press [MODE] to switch to the random playback mode.
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for "Disc" mode, just
opening the disc tray will clear the program info.)
0 : 26 : 24
Total
Track" appears
All" appears during
EN
Advertisement
Table of Contents
