Program Playback - Magnavox NB500MG1F - Blu-Ray Disc Player Owner's Manual

Program Playback

efore
ou
begin
You can play back the disc/card in your desired order.
1
In stop mode, press [MODE].
2
Use [K / L] to select a track / file, then press
[OK].
1
- - / 16
Program
CD_DA
8 0:36
9 1:14
10 0:45
0:50
11
12 0:53
13 0:20
14 0:54
Page Up
1 audio CD
JPEG
audio CD
2
JPEG
3 Track / File list
Programmed list : Track / File list in the
4
Cumulative playback time of all tracks / files in the
5
programmed list.
Playback status
6
Current page / Total page number
7
Operation Guide: Press [RED] to go to the previous
8
• For JPEG files, use [K / L] to select a folder, then press
[OK] first, and then use [K / L] to select a file, then
press [OK].
• Press [CLEAR] to erase the last file of the program.
• Use [K / L] to select "All Clear" at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the right
hand screen.
• Use [s / B] to go back / forward between the
hierarchy of folders.
EN
2 3 4 5
0 : 26 : 24
Total
2 1:14
4 0:50
9 1:14
0:50
11
12 0:53
14 0:54
8 0:36
Page Down Page Prev Page Next
e.g.) audio CD
: Track information
: File information
: "CD-DA" will be displayed.
: Current Disc, SD Memory Card,
or folder name will be displayed.
: Track / File list in the original
order.
programmed order.
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the next
page in the programmed list.
PLAYBACK
3
Press [B (play)] to start program playback.
• The program playback will start.
Program
6
To exit from the program playback mode:
• Press [RETURN] in stop mode.
Note
• During program playback, press [C (stop)] once to
7
set the resume point, and then press [B (play)] to
resume program playback from where [C (stop)]
8
was pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (JPEG).
• During program playback, press [C (stop)] twice to
display the program screen. To go back to the
normal program playback, press [RETURN] to exit
from the program screen, then press [B (play)].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program,
press [REPEAT] repeatedly until "
appears during playback. To repeat the entire
program, press [REPEAT] repeatedly until "
appears during playback.
• Playback from a desired track / file and random
playback are not available during program playback.
• Press [MODE] to switch to the random playback mode.
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for "Disc" mode, just
opening the disc tray will clear the program info.)
2 / 16 0 : 01 : 05
Total
CD_DA
2 1:14
4 0:50
9 1:14
0:50
11
12 0:53
14 0:54
8 0:36
Page Down
0 : 26 : 24
Track"
All"
23