Preparation For Use; Turn On The Unit For The First Time; To Add Or Delete Channels; Clock Setup - Magnavox CMWD2206 - Owner's Manual

Preparation for Use

p

Turn on the Unit for the First Time

Operations described in this manual are O
VCR
mainly based on the remote control.
1
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see "RF Output Channel" section on page 6.
Select your language when turning this unit on for the first time.
2
B
Then press [ ] to go to next step.
STANDBY-ON
or
B
3
Press [ ] to start Auto Set Up.
Do you connect the cable from the cable box or the satellite box to the
unit's ANT-IN jack?
Yes
Press [MENU] to exit.
• Refer to "Hint for Cable Box or Satellite Box" section on page 6.
No
Please wait for a few minutes.
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH. G// / K , H/L] (or [CHANNEL K// L ]).
• If "AUTO SET UP" appears on the TV screen again, check the cable con-
nections. Then, press [B] once again.
Hint
• Repeat these steps only if either there was a power failure or this unit
has been unplugged for more than 30 seconds.
To Select a Channel
You can select a channel by using the number buttons or
[SKIP/CH. G/K, H/L].
Notes for using the number buttons:
• When selecting cable channels which are higher than 99, enter
channel numbers as a three-digit number.
(for example: 117, press [1], [1], [7])
• You must precede single-digit channel numbers with a zero. (for
example: 02, 03, 04 and so on)

To Add or Delete Channels

VCR
Press [MENU] to select "CHANNEL SET UP".
1
Then press [B] to go to next step.
MENU
or
• If the clock is not set, the "CLOCK SET" screen appears when you
press [MENU]. In this case, press [MENU] again.
2 Select "MANUAL SET UP".
Then press [B] to go to next step.
or
3 Select the channel to be added or deleted.
or
or
4 Select "ADD" or "DELETE".
or
To exit the menu
5
CLEAR/
C. RESET
i d ib d i hi
LANGUAGE SELECT
B ENGLISH
FRANCAIS
ESPAÑOL
AUTO SET UP
YES
After scanning...
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
MANUAL SET UP
CHANNEL 30
ADD
or
MANUAL SET UP
CHANNEL 30
DELETE
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
l
2) Select "CHANNEL SET UP" by using [K/L], then press [B].
3) Select "AUTO SET UP" by using [K/L], then press [B]. After scan-
ning, the tuner stops on the lowest memorized channel.
To Change the On-Screen Language g
1) Press [MENU] until the main menu appears.
2) Select "LANGUAGE SELECT" by using [K/L], then
press [B].
[ON]
3) Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by using [K/
L] then press [CLEAR/C.RESET].
Hint
CH 01
• If you accidentally select Spanish or French and need English: Press
[MENU] and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B]
and select ENGLISH. Finally, press [CLEAR/C.RESET].
• To add or delete channels in this unit, [SKIP/CH. G/K, H/L] button
works on the channel number memorized in this unit, [K/L] works on
all.

Clock Setup

NO
VCR
Press [MENU] and select "CLOCK SET".
1
Then press [B] to go to next step.
MENU
• If the clock is not set, the CLOCK SET screen appears when you
press [MENU]. In this case, go to step 2.
2 Select the current month.
Then press [B] to go to next step.
3 Select the current day.
Then press [B] to go to next step.
4 Select the current year.
Then press [B] to go to next step.
5 Select the current hour.
Then press [B] to go to next step.
Select the current minute.
6
Then press [B] to go to next step.
Select "AM" or "PM".
7
(CATV)
8 To exit the CLOCK SET screen
(CATV)
Hint
• To go back one step, press [s] (during steps 2 to 7).
• Your clock setting will be lost if either there is a power failure or this
unit has been unplugged for more than 30 seconds.
– 8 –
g
g g
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
or
MONTH DAY
1 0 / – –
HOUR MINUTE
– – : – –
or
MONTH DAY
1 0 / 0 5
HOUR MINUTE
– – : – –
or
MONTH DAY
1 0 / 0 5
HOUR MINUTE
– – : – –
or
MONTH DAY
1 0 / 0 5 MON
HOUR MINUTE
0 5 : – –
or
MONTH DAY
1 0 / 0 5 MON
HOUR MINUTE
0 5 : 4 0
or
MONTH DAY
1 0 / 0 5 MON
or
HOUR MINUTE
0 5 : 4 0
- M E N U -
[OFF]
CLOCK SET
YEAR
– – – –
AM/PM
– –
CLOCK SET
YEAR
– – – –
AM/PM
– –
CLOCK SET
YEAR
2 0 0 9
AM/PM
– –
CLOCK SET
YEAR
2 0 0 9
AM/PM
– –
CLOCK SET
YEAR
2 0 0 9
AM/PM
– –
CLOCK SET
YEAR
2 0 0 9
AM/PM
P M AM
B PM
EN