Morphy Richards POD COMPACT BAGLESS VACUUM CLEANER - REV 2 Manual page 5

New pod vc73121 rev 2
Assembly
Your pod vacuum cleaner has an
efficient suction action to provide high
levels of cleaning on all types of surface
around the home.
Always remove the plug from the power
socket before fitting or removing
accessories.
Insert the flexible hose
Insert the flexible hose ⁄ in the hose
inlet duct · on the front of the product,
press until it clicks into position.
Release
button
To remove the flexible hose
Press the release button to release the
flexible hose. Pull the hose firmly from the
hose inlet duct.
Fitting the extension tubes and
accessories
Join the two extension tubes Ê together
and attach the extension tubes to the
handle end Á of the hose. Some tasks may
be easier with only one extension tube
fitted.
Attach the floor nozzle „ to the
extension tubes. The floor nozzle can be
used for carpets, rugs, hard floors and tiles.
Other accessories include:
• Crevice tool ‰ for awkward places,
corners and behind radiators etc.
• Brush attachment  for pelmets,
delicate objects etc.
• Upholstery nozzle Ë for sofas,
armchairs etc.
20/3/03 10:09 PM
4
Page 5
Controls
On/off/variable power control
Press the on/off/variable
power switch fi down to
turn the appliance on. Press
again to turn off.
Turn the dial clockwise to
increase the power for
maximum suction or anti-
clockwise to reduce suction when cleaning
delicate surfaces such as curtains etc.
If suction power appears to be low check
that the variable power dial is set to
maximum.
Suction control on
the handle
The suction power
can be adjusted using
the fingertip control on
the handle.
Closed : full suction
Open : low suction
2 position wheeled floor nozzle
The brushes should be retracted for use
on carpets and down for use on hard floors
by adjusting the lever on the floor nozzle.
„