FP48955MEE-Rev2
16/1/07
fi
fl
‡
VEGATABLE SHREDDER
ATTACHMENT
•
Always unplug the product before
putting on or taking off attachments
•
Remove the attachment hub cover
at the front of the product N.
Features
⁄ Food pusher
¤ Main housing and feed tube
‹ Drive shaft
› Fine grating / shredding cone
fi Cone retaining collar
fl Coarse grating / shredding cone
‡ Fine slicing cone
· Coarse slicing cone
Assembly instructions
•
Choose the appropriate cone for the
application.
•
Affix the shaft to the cone by
aligning the fixing tabs on the shaft
10:46
Page 9
⁄
¤
›
‹
·
to the holes in the base of the cone
O.
•
Twist the shaft clockwise to lock
into place.
•
Locate the shaft end into the main
housing hub.
•
Screw the cone retaining collar into
place. Take care when fitting the
collar to prevent damage to the
product.
•
Hold down the attachment retainer
pin whilst fitting the attachments.
•
Align the flats of the shaft end to
approximately the same angle as
that of the drive and insert into the
drive P.
•
Rotate the attachment slightly until
it locates to the drive and push into
place Q.
•
Release the attachment retainer pin
and rotate the attachment slightly
until the hole on the attachment
locates to the retainer pin on the
main unit drive hub R.
www.morphyrichards.com
N
O
g
P
Q
R
9