Table of Contents
Advertisement
48952 Rev1
23/5/06
Unpacking your hand
blender
WARNING: Carefully unpack
your hand blender, the
blades are very sharp.
Wash all parts with the
exception of the blender body
before first use, see cleaning
instructions page 7. .
Assembling the
attachments
Insert by pushing the blending
leg, whisk gearbox or the
chopping bowl lid into the
blender body, until it clicks into
place.
To remove the attachment
press the release button.
Using the hand
blender
WARNING: Make sure that
the hand blender is
switched off and unplugged
from the mains.
1
Clean the blending leg before
using it for the first time with a
damp cloth.
2
Insert the blending leg into the
main housing and click into
place A.
3
The hand blender can now be
plugged in and is ready to use.
WARNING: Do not blend in
the chopping bowl or
damage will occur to the
product. Use the plastic
measuring beaker.
4
Place the blending leg into the
food to blend, select the
required speed for your food on
the speed control, then press
the on/off button B.
Release the on/off to stop
blending.
5 After use, unplug the blender
and remove the blending leg by
pressing the release button and
pull gently away.
6
Give the blending leg a rinse
with cold water. If the main
body has been splashed just
give it a wipe with a damp
cloth.
11:27
Page 5
WARNING: Your hand
blender is designed for
intermittent use. Do not use
non-stop for more than 1
minute. Allow to cool down
for a minimum of 5 minutes
before further use.
Using the chopper
attachment
The chopper attachment can
be used for meat, hard cheese,
nuts, herbs, boiled eggs, dry
bread etc.
WARNING: Blades are very
sharp.
1
Place the chopping bowl onto
the chopping bowl base. This
will prevent the jug from
slipping C.
2
Fit the chopping blade into the
chopping bowl D.
3
Add food to be chopped.
4
Place the chopping lid on top,
making sure that it is correctly
fitted on the chopping blade E.
5
Place the blender body onto
the top of the chopping bowl
lid until it has clicked into
place.
6
Plug the blender into the mains
socket and press the on/off
switch, holding the blender and
jug firmly on the work surface.
Note: Your hand blender is not
suitable for grinding coffee
beans.
When chopping meat ensure
that all the bones have been
removed, before adding to the
bowl.
www.morphyrichards.com
A
B
4
5
3
6
2
7
1
8
C
D
E
5
Advertisement
Table of Contents
