Dell Precision NT499 User Manual page 200

4
1 power cable
3 SATA connector
6 If you are installing a serial ATA drive:
Connect a power cable to the back of the hard drive and to the power
a
supply.
Connect the serial ATA cable to the back of the hard drive and to the
b
SATA connector on the system board.
7 If you are installing a SAS drive:
Connect the power cable to the SAS connector.
a
Connect the SAS connector to the back of the drive.
b
Connect the SAS cable to the SAS controller card.
c
200
Adding and Replacing Parts
1
2
4
serial ATA cable
optional third serial ATA/SAS
hard drive
2
3