BMW R 1200 GS Rider's Manual page 73

Repeatedly press button 1 until
the setting you want to use
appears on the display.
If a road-riding mode has been
selected the following can be
displayed:
COMF
: comfort mode
NORM
: normal mode
SPORT
: sport mode
If an off-roading stage for off-
road riding has been selected the
following can be displayed:
SOFT
: Soft damping charac-
teristic
NORM
: normal mode
HARD
: Hard damping charac-
teristic
The setting shown on the dis-
play is automatically accepted
as the damping characterist-
ic if you allow a certain length
of time to pass without press-
ing button 1. The ESA setting
then automatically disappears
from the display.
Adjust spring preload
Start the engine.
You cannot adjust spring
preload while the motor-
cycle is on the move.
Wait until adjustment com-
pletes (reading stops flashing)
before pulling away.
If the temperature is very low,
take the weight off the motor-
cycle before increasing spring
preload; if applicable, have your
passenger dismount.
Press button 1 to view the cur-
rent setting.
Repeatedly press button 1 until
the setting you want to use
appears on the display.
The following can be displayed:
One-up
One-up with luggage
Two-up (with luggage)
The possible settings for off-road
riding then appear on the display.
4
69
z