BMW R 1200 GS Rider's Manual page 133

Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Turn bulb 2 clockwise to install
it in the bulb housing.
OE
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
OE
Install screw 1.
8
129
z