Residual Range - BMW K 1200 R Rider's Manual

If you prefer, you can use but-
ton 2 for this purpose.
The tripmeter is reset to zero.
with OE On-board computer
or with OE Tyre-pressure
monitoring (RDC):
Press and hold down button 2.
In this case, the button
on the handlebar fitting
is for operating the on-board
computer or calling up the RDC
readings.

Residual range

Residual-range reading appears
accompanied by the word
and indicates how
RANGE
far you can ride with the fuel
remaining in the tank. This
reading is not displayed until fuel
level has dropped to reserve.
This distance is calculated on the
basis of fuel level and average
consumption.
When you refuel, the increase in
fuel level is not registered unless
several litres are added to the
fuel already in the tank.
When refuelling after running on
reserve, make sure that you top
4
49
z