1
Setting the clock
d
Warning:
Do not attempt to set the clock
unless the motorcycle is at a
standstill
– Risk of accident.
• Ignition switch ON (
• Press button 1 for longer than
2 seconds, until the clock enters
set mode
2
3
– Hours reading 2 starts flashing:
briefly press button 1 to set
• Press button 1 again for longer
than 2 seconds
– Minutes reading 3 starts flash-
ing: briefly press button 1 to set
• Press button 1 again for longer
12)
than 2 seconds to exit set mode
b
Set mode is automatically exited if
20 seconds elapse without the
button being pressed.
Clock
1
25