Minolta DIMAGE X - SOFTWARE Instruction Manual page 2

B
EFORE YOU BEGIN
Before installing the DiMAGE Image Viewer Utility software, read the data-transfer section in the
camera manual. This section details how to connect the camera to a computer using the supplied
USB cable. Users with Windows 98/98SE or Mac OS 8.6 will need to install driver software before
connecting the camera to a computer. Image data can also be downloaded with an SD memory or
MultiMedia card reader. The examples in this manual assume the camera is connected to the com-
puter with a USB cable as described in the camera manual.
This instruction manual does not provide instruction in the basic operation of personal computers, or
the basic operation of Windows or Macintosh operating systems; refer to the manuals supplied with
the computer.
The examples in this manual use Windows software. The appearance of the screens may differ from
the examples when using Macintosh or other Windows operating systems.
Every precaution has been taken to ensure the accuracy of this material. Contact Minolta if you have
any questions. Minolta is not responsible for any loss or damage caused by the use of this software.
This instruction manual may not be copied either in part or in its entirety without the prior permission
of Minolta Co., Ltd.
2