Next Sequence For Next Bar - Akai MPC5000 Manual Addendum

Next Sequence for next bar

Sequences can now be changed at the end of the current measure that is playing using the NXTBAR option.
In NEXT SEQUENCE Mode, switch to the next sequence on the next bar by doing the following:
01. While the MPC is playing, hit the pad corresponding to the Sequence you would like to switch to.
The Sequence Selected will be indicated in the lower left of the screen as shown to the right.
02. Press the [F3] (NXTBAR) button.
The [NXTBAR] Button will darken to indicate that it is active. The MPC5000 will change sequences at the top of the next bar.
Tip: For more information on NEXT SEQUENCE Mode, see page 82 of the MPC5000 Reference Manual.
4