Improvements To Main Mode; Track Lock; Midi Receive Indicator; Navigation Improvements - Akai MPC5000 Manual Addendum

Improvements to MAIN Mode

Track Lock

Individual tracks in a sequence can now be locked for editing. This will
allow data on that track to be protected when performing global
functions, and protects from accidental adding, deleting or changing
the sequence data on the track.
controller changes, Q-LINK events etc will be preserved.
can be changed to allow you to audition different sounds on the locked
track while preserving the data from editing.
A Track's LOCK Status is indicated by the padlock icon to the left of the
TRACK field as indicated on the right.
following:
01. Select the TRACK LOCK icon
The TRACK LOCK icon appears as a padlock to the left of the TRACK field as shown on the right.
02. Turn the [DATA] Wheel, or press the [+] button to toggle the TRACK LOCK icon.
This will toggle the TRACK LOCK Icon. The icon will indicate the track status as shown below:
Track is unlocked.
Track is locked.

MIDI Receive Indicator

A MIDI Receive indicator has been added to MAIN page.
Incoming MIDI is detected at MIDI IN 1 or B, the indicator will light as
shown on the right.

Navigation Improvements

While in MAIN Mode, the following key shortcuts are available:

Quick Sequence and Track Select

[SHIFT] + [UP ARROW] buttons will always move the cursor to the 'Sequence' field.
[SHIFT] + [DOWN ARROW] buttons will always move the cursor to the 'Track' field.

Track Select with [SHIFT] + Pad

While on the MAIN Page, press the [SHIFT] button and hit a pad to select the corresponding Track. Tracks are selected by
number as follows:
Pad Number
Pads A01-A16
Pads B01-B16
All data, including MIDI notes,
Programs
To lock or unlock a track, do the
Track Number
Tracks 1-16
Tracks 17-32
When
1