Connecting New Devices; Connecting To A Local Area Network; Connecting A Usb Device - Targus USB 2.0 LATPOP DOCKING STATION User Manual

Connecting New Devices

To avoid possible damage when connecting a new device, do not
force the cable connector into the port on the docking station. If the
cable connector does not attach smoothly, turn the connector over
and try attaching it again.

Connecting to a Local Area Network

To connect an ethernet cable with RJ-45 connect, attach the cable
connector to the ethernet/network port on the docking station. Ad-
ditional procedures to connect to an actual network depend on the
type of network you are using. Contact your network administrator
for detailed instructions.

Connecting a USB Device

To connect a USB device, plug it into a USB port on the dock-
ing station and follow the additional instructions provided with the
device. All four USB ports meet USB hi-speed requirements by
providing 480Mbps through-put and 500mA of power.
However, the two black USB ports have two unique features. See
"Targus Always On" more details.
The white USB ports are high-speed ports that provide standard
500mA of power. The black USB power ports are high-speed ports
that provide up to 1Amp.
Connecting and Configuring an Audio Device
1. Plug your headphones or speakers into the green 3.5mm
Audio Out port on the docking station.
2. To connect a microphone, plug it into the mono Audio In port.
3. The sound and mic should come out automatically when you
plug the docking station. Make sure that both speaker and
micphone volume is not set to MUTE.
4. To manually enable your headphones or speakers in case
automatic transfer is not possible
Targus USB 2.0 Laptop Docking Station with Video
7