Jensen JDV8035 Installation And Operation Manual page 8

7) FRONT PANEL A/V IN JACK
The unit is allowed to connect with external Audio /
Video system such like Digital Camera or Game
Console. You can connect the external A/V system
thru the A/V in jack on front panel. After connect with
external A/V system, pressing mode to "A/V In 2" to
enjoy this external A/V system on this unit.
The unit is support A/V out thru the A/V Jack on front panel. For more details
operation, please refer to "Menu operation-AV Jack
The unit is only support the 3.5mm A/V Jack Pin Assignment shown as the diagram..
18) Display / Menu Button
This DISPLAY inter-change button can be used to interchange between the 2 type of DISPLAY
INTERFACE, the 'Image Display Interface" & 'Big Font Display interface'. This is useful when
playing a CD or MP3 or WMA or other music disc and if user prefer to see the CD Track no /
MP3 File number and elapse time with bigger numerical fonts, the Big Font Display offer a
better read out for the numerical display. User can press the DISP button to inter-change from
Image Display Interface to Big Font Display Interface.
Image Display Interface
Caution:
In some countries, it's unlawful to operate a vehicle while video is displayed in the driver's
viewing area. Pls always switch the unit's display to "Big Font Type Display" mode by pressing
the DISP/MENU button while driving.
For safety reason, the driver should only enjoy / watch the video while the car is in parking
mode.
After releasing the front panel, use a pencil or any non-metalic object to press & hold the reset
button for five seconds to reset the main unit and the unit will return to the factory default
settings.
To Reset the DVD Setting
Press SET UP button on remote control or long press AS/PS button to bring
up the SET UP Menu, select RATING then select DEFAULT, the DVD Setting
will resume to factory default value .
1 Left Audio
Right Audio
2
Ground
3
Video
4
3.5mm A/V Cable ( not included )
Big Font Display Interface
E - 8
Parking operations
Caution:
In order to avoid any accident, the driver must not watch video while driving. This unit is
designed to not allow watching moving video while driving. Park your car in a safe place
and engage the 'parking brake' before watching moving video
Be sure to connect Parking Brake connection lead (see more details on page
'Wiring Diagram')
If watch moving video from Disc or AV In source but Parking Brake IS NOT
PROPERLY CONNECTED, the video signal will be blocked by the system and
the below display will be shown on the unit display:
The Video Blocking system under Parking Brake NOT ENGAGE only control
this unit's display, This system will not affect the Video Output thru the rear
RCA Video Output
MENU
Parking On/off
The default is 'ON' and there will be video block by system if the Parking Brake is
NOT ENGAGE. Once changed to "OFF", the system will allow video output even if
the Parking Wire is NOT ENGAGE. This is useful if the Parking Wire is not properly
connected.
JDV8035