Manual Clock Setting - Emerson EWH100F Owner's Manual

5
If you do not know the PBS channel number
in your area :
Using / , select "Auto". Press ENTER.
Your setting is now activated.
If you know the PBS channel number
in your area :
Using / , select "Manual". Press ENTER.
Input window will appear.
Set Channel No. Set Channel No
Using the Number Buttons or
PBS channel number. Press ENTER.
Your setting is now activated.
If you want to set the clock manually and to
cancel the Auto Clock Setting :
Using / , select "Off ". Press ENTER.
The Auto Clock Setting will be canceled.
• The default setting is "Auto".
6
Press SETUP to exit.
7
Press POWER to turn off the unit.
This unit will search for the clock time only when
the power is off. Leave it off for several minutes to
give the unit a time to set the clock.
Note
• The clock may set itself automatically after you
connect the antenna / cable signal to this unit and
plug in the power cord. In this case, the current time
will appear on the Front Panel Display.
• If the current time is not displayed or the displayed
clock time is not correct, set the clock manually.
Initial Setups
Clock Setting (Cont'd)
CH 1 CH
/ , enter the

Manual Clock Setting

1
Press SETUP.
"Easy Setting Menu" or "Advanced Menu" will appear.
Advanced Menu
DVD Menu DVD Menu
DVR MENU DVR Menu Menu
Initial Setup Initial Setup
Timer Program
Easy Setting Menu
2
Using / , select "Initial Setup". Press ENTER.
Advanced Menu
DVD Menu DVD Menu
DVR Menu Menu
Initial Setup
Timer Program Timer Program
Easy Setting Menu Easy Setting Menu
3
Using / , select "Clock Setting".
Press ENTER.
Clock Setting Menu will appear.
Clock Setting Cloc
Clock Setting Cloc
Auto Cloc uto Clock Setting
Da Daylight Sa ylight Saving Time
4
Using / , select "Clock Setting".
Press ENTER.
Clock Setting Window will appear.
Clock Setting Clock Setting
MAR / MAR 15 / 2006 2006
5
Using / , move to the item your want to set, and
using / , change the setting to suite your prefer-
ence.
6
When all the information is entered, press ENTER.
Your setting is now activated.
Although seconds are not displayed, they will be
counted from zero.
7
Press SETUP to exit.
Note
• Your clock setting will be lost if either there is a
power failure or this unit has been unplugged for
more than 30 seconds.
DVD Disc Format
DVD Recording Format
Finalize
Disc Protect
Delete Playlist
OSD Language
Clock Setting
Channel Setting
Playback
Record
Display
Reset to factory default
k Setting
k Setting
k Setting
Time
(Wed) 11 : 26 AM AM
25