Audio Out - Emerson EWH100F Owner's Manual

5. Audio Out

You can set the digital audio output.
(Follow steps 1 to 4 on page 112.)
Using / , select "Audio Out".
Press ENTER.
Menu window will appear.
Dynamic Range Control Dynamic Range Control
Fast Forward with Audio Fast Forward with Audio
• Using / , select a desired item to set.
Press ENTER.
Menu or Option window will appear.
Referring to the explanations below, set the selected item.
PCM (Default: 48kHz)
48kHz 48kHz
• Using / , select a desired setting. Press ENTER.
Your setting is now activated.
48kHz : If your amplifier / decoder is NOT compatible
with 96kHz PCM, select "48kHz". 96kHz
sound will be output in 48kHz.
96kHz : If your amplifier / decoder is compatible with
96kHz PCM, select "96kHz". 96kHz sound
will be output.
Note
When playing back disc with copyright protection
• Even if you select "96kHz", the sound will be down
sampled at 48kHz.
Other Setups
Playback Setting (Cont'd)
Audio Out Audio Out
PCM PCM
Dolby Digital Dolby Digital
Dolby Digital Dolby Digital PCM PCM
96kHz 96kHz
Dolby Digital (Default: Stream)
Dolby Digital Dolby Digital Dolby Digital Dolb
PCM PCM
• Using / , select a desired setting.
Press ENTER.
Your setting is now activated.
PCM: Convert the Dolby Digital into "PCM"
(2 channel).
When your amplifier / decoder is NOT
compatible with Dolby Digital, set to PCM.
Stream: Outputs Dolby Digital signals.
When your amplifier / decoder is compati-
ble with Dolby Digital, set to "Stream".
Note
When playing back a DVD-RW disc recorded
in VR mode
• If the audio on a disc is recorded in Dolby Digital
format, set Dolby Digital to PCM so that you can
switch to main audio (L), sub audio (R), or a mix of
both (L / R) with your amplifier / decoder.
y Digital
DTS DTS
Stream
115