On-Screen Display; Status Display; Checking The Status - Magnavox CMWC20T6 Owner's Manual

TV/VCR SECTION
O
N-SCREEN DISPLAY

STATUS DISPLAY

On screen display examples are shown
below.
1
PLAY B
SP
2
1. VCR status
Displays the current VCR motion:
PLAY / STOP / REC / OTR / PAUSE / FF / REW
2. Tape speed (during recording)
Displays the tape speed: SP / SLP
3. Clock
4. Channel number (in TV mode)
Displays the current channel number.
"AUX" is displayed in external input mode.
5. Tape counter (during playback or recording)
Shows the elapsed recording or playback time.
(Not available for a blank tape or blank portions
on the tape.) You can reset the counter by press-
ing [CLEAR].
14
EN
TV/VCR TV/VCR
3
12:00AM
4
CH 123
5
COUNT 0:00:00

CHECKING THE STATUS

While receiving a broadcast or playing a
VHS tape, you can check the status dis-
played on the screen by pressing [DISPLAY]. The
display will change as shown below each time you
press [DISPLAY].
WHEN THE CLOSED CAPTION IS OFF
The display switches among VCR counter and clock.
Display OFF COUNTER display
STOP
SP COUNT 0:12:34
After 5 seconds
COUNT 0:12:34
WHEN THE CLOSED CAPTION IS ON
The display switches among VCR counter and clock.
Display OFF CLOCK/COUNTER
display
STOP
SP COUNT 0:12:34
TV/VCR TV/VCR
CLOCK display
STOP 5:40PM
CH2
SP
After 5 seconds
5:40PM
CH2
5:40PM
CH2
*The display will disappear
after 5 seconds