NEC VERSA SXI Manual page 19

— toggles the system beep on and off.
Fn-F6
— Toggles between various power management levels in Windows NT.
Fn-F7
Beeps indicate the level chosen as follows:
1 beep
2 beeps
3 beeps
4 beeps
No function when Windows 98/2000 configured for Advanced Configuration and
Power Interface (ACPI).
Fn-F8 — Increases the LCD panel brightness.
Fn-F9 — Decreases the LCD panel brightness.
— Toggles LCD expansion mode (DOS only).
Fn-F10
Initiates a Save-to-RAM, in Windows NT. Saves your working
Fn-ESC —
environment to memory.
An additional preprogrammed function key,
control key for support of IBM 327x connections.
Numeric keypad — Pressing NumLock on the keyboard activates the numeric
!
keypad numbers and functions printed in blue on the keys.
The keypad lets you type numbers and mathematical operands (+, -) as you would
on a calculator. The keypad is ideal for entering long lists of numbers.
When you press NumLock again, the keys revert to their normal functions as
typewriter keys.
Cursor Control keys — Cursor control keys let you position the cursor on the screen
!
where you want. On the screen, the cursor is a blinking underline, block, or vertical
line depending on the application. The cursor indicates where the next text typed is
inserted.
Control keys —
!
keys to change their functions. To use control keys, press and hold the control key
while pressing another key. For example, "press
key and type the letter c. How the key combination works depends on the
Ctrl
application you are running.
Off
Custom
Highest Performance
Longest Life
,
, and
Ctrl Alt, Fn Shift
, simulates pressing the right
Fn-Left Ctrl
are controls used in conjunction with other
" means to hold down the
Ctrl c
Introducing Your NEC Versa 1-9