System Date/Time; Diskette Drive; Ide Devices - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

T
Boot Options
T
Video Mode
T
Mouse
T
Base Memory
T
Extended Memory
T
BIOS Version

System Date/Time

Use this menu to set the current time and date. The settings remain in memory even after
you turn off the system power.
To set the date, highlight "date" and press
dd/mm/yyyy format.
To set the time, highlight "time" and press
seconds in hh:mm:ss, 24-hour format. For example, type

Diskette Drive

This menu selects the type of diskette drive in the system. Unless you are changing the
hardware, you do not need to change the diskette drive (floppy) A or B settings.
If you add an optional 5 1/4-inch diskette drive to the system, select "Floppy B" and change
the parameter to "1.2 MB, 5.25 inch."

IDE Devices

The standard hard disk drive (drive C:) shipped with the system is configured as "Primary
IDE Master." This field reports the presence of, and identification string reported by, up to
four physical IDE drives (two on each PCI/IDE connector). When the cursor is placed on
one of these fields and selected by pressing the
allowing the drive parameters to be set.
Jumper settings on the IDE device must be set to the master or slave device (see the
documentation that comes with the device).
Enter
NOTE: The PowerMate Professional Series
provides Year 2000-support.
Setup and Operation
. Type the current day, month, and year in
. Type the current hour, minute, and
Enter
13:30:00
key, the IDE Device Submenu appears
Enter
for 1:30 P.M.
2-11