Table of Contents
Advertisement
Rev 1.0 6/May/2005
NEC Mobile Suite User Guide for N411i
The purpose of this step is to define which of the CSV file fields correspond to the PIM fields
(mapping). The user can do this by selecting a field in the From table (on the left) and then click on the
right arrow button (
) placing it in the To table (on the right). It will be placed in the Mapped From
column. If no position is selected in the To table, the CSV field will be placed in its first available
position in the Mapped From column.
If the [Default Mapping] button is pressed an automatic correspondence will be done, in which the
first CSV field corresponds to the first PIM field, the second CSV field corresponds to the second PIM
field and so on and so forth.
On the right of the To table there are two buttons, an up arrow and a down arrow. These will allow the
user to change the order of the fields by selecting the intended one and pressing the up or the down
arrow as many times necessary until its in the required position.
CSV fields can be removed from the To table by selecting them and clicking on the left arrow button -
. Pressing the [Erase Mapping] will clear all configured fields in the Mapped From column.
After all is set press [Next].
This will be the next screen presented to the user.
Advertisement
Table of Contents
