NEC MH110 - SETUP AND Administration Manual page 28

4-4 Mobile Handset Configuration
Admin Menu Items
Security
Extension number
OAI on/off
Admin PW
Table 4-4 Wireless Telephone Modes
2nd Level
*None
WEP
Cisco FSR
Enable OAI
Disable OAI
IP Address
Table 4-4 describes two modes in which Wireless Telephones can
operate:
• DHCP enabled
• Static IP
Select the mode for operation from the IP Address menu.
Modes
Use DHCP
Static IP
Table 4-5 describes components that must be configured, regardless of
the mode in which the Wireless Telephone is operating.
MH110/MH120 IP Wireless Telephone Setup and Administration Guide - Revision 1
3rd Level
Authentication
WEP On/Off
Key Information
Rotation Secret
Username
Password
Descriptions
Will use Dynamic Host Configuration Protocol to assign an IP
address each time the Mobile Handset is turned on. If DHCP is
enabled, the Mobile Handset also receives all other IP address
configurations from the DHCP server. *
Allows you to manually set a fixed IP address. If selected, the Mobile
Handset will prompt for the IP addresses of each configurable
network component. When entering addresses, enter the digits only,
including leading zeroes. No periods are required.
4th Level
Open System
Shared Key
Default Key
Key Length
Key 1-4