Device Preparation - NEC Image P100E Series Manual

Device Preparation

Before you install a storage device in the system, follow any
pre-installation instructions that come with the device. You
should also check Chapter 3 and Chapter 4 in this document
for information about setting system parameters for the
device being installed.
For example, check the following items for these devices:
Diskette drive — remove any termination on the optional
diskette drive. See the drive documentation.
SCSI-2 device — check the documentation that comes
with the device and the following sections for informa-
tion on setting interface termination, termination power,
motor start at power-on, SCSI identification (ID) num-
ber, and any other device functions.
7-30 Adding Options
5 1/4 - Inch
Accessible Slots
5 1/4 - Inch
Accessible Slot
(contains
CD-ROM reader)
3 1/2 - Inch
Accessible Slot
(contains 1.44-MB
diskette drive)
Locating device slots