Park; Prime Line Preference; Privacy Release Groups - NEC DSX CORDLESS LITE II Manual

Feature Operation

Park

Park is available by default.
To Park a call in a System Park Orbit:
1. While on an outside call, press TRANSFER .
2. Dial * and the System Park Orbit (60-69).
3. Press TALK to hang up.
To retrieve a call from a System Park Orbit:
1. Press TALK + Dial * and the System Park Orbit (60-69).
To Park a call at a co-worker's extension (using Personal Park):
1. While on an outside call, press TRANSFER .
2. Dial ** .
3. Dial the number of the extension at which you want to Park the call.
4. Press TALK to hang up.
To retrieve a call parked at a co-worker's extension:
1. Press TALK + Dial ** and the number of the extension at which the call is parked.

Prime Line Preference

Intercom Prime Line Preference is enabled by default.
To place a call on your Prime Line:
1. Press TALK + Dial the call normally.
- To bypass your Prime Line, press another line key before pressing TALK .
- If your Prime Line is not set for Intercom, you cannot place Intercom calls.

Privacy Release Groups

Privacy Release Groups is disabled by default.
To join an outside call with a member of your Privacy Release Group:
1. Press the busy line key.
- Your display shows:
To prevent a member of your Privacy Release Group from joining your call:
1. Place or answer an outside call on a line key.
2. Press the line key.
3. Press the line key again to allow a co-worker to join in.
32 ◆ Chapter 2: Features
CONFERENCE CALL
DSX Cordless Lite II Telephone User Guide