Central Office Calls, Placing; Conference; Directed Call Pickup - NEC DSX CORDLESS LITE II Manual

Feature Operation
Central Office Calls, Placing
Central Office Calls, Placing is enabled by default.
To place an outside call using a line or loop key:
- Press the line or loop key. (You may have to enter 0-9 for a Line Group number after pressing the
To place an outside call over a specific line using Line Dial-Up:
1. Press TALK .
2. Dial #9 .
3. Dial the line number (e.g., 01 for line 1).
To place an outside call using Direct Line Access:
1. Press TALK .
2. Dial 1 .
3. Dial the line number (e.g., 01 for line 1).
To place an outside call using Line Group Access:
1. Press TALK and dial a Line Group Access Code (90-98).
- If you hear dial tone as soon as you dial 9, your system has Line Group Routing. A line group has

Conference

Conference is enabled by default.
To set up a Conference:
1. Establish Intercom or outside call.
2. Press CONF .
3. Dial extension you want to add,
OR
Place or answer an outside call,
OR
Retrieve call from Park Orbit.
4. Press CONF to set up the Conference.
- You see: CONFERENCE CALL

Directed Call Pickup

Directed Call Pickup is enabled by default.
To use Directed Call Pickup to intercept a call to a co-worker's extension:
1. Press TALK .
2. Dial ** .
3. Dial your co-worker's extension number.
- To pick up a call ringing an attendant, dial the attendant's extension number (e.g., 300). Do not dial
24 ◆ Chapter 2: Features
loop key).
been automatically selected for you.
0 or 01-04.
DSX Cordless Lite II Telephone User Guide