Forced Line Disconnect; Group Call Pickup; Group Ring; Hold - NEC DSX CORDLESS LITE II Manual

Feature Operation

Forced Line Disconnect

Forced Line Disconnect is disabled by default.
To disconnect a busy outside line:
1. Press line key for busy outside line.
OR
Press TALK and dial the line's Line Access Code (e.g., 101 for line 1).
2. Dial # to disconnect the line.
3. Press line key and dial the number you want to call.

Group Call Pickup

Group Call Pickup is disabled by default.
To answer a call ringing a phone in your Pickup Group:
1. Press TALK and dial *# .
OR
Press the flashing Group Pickup key.

Group Ring

Group Ring is disabled by default.
To answer a call ringing into your Ring Group:
1. Press TALK .

Hold

Hold is enabled by default.
To place an outside call on System Hold:
1. Press HOLD .
- The line key flashes fast to indicate that it is on Hold.
- The line will recall with a distinctive "wink-on" flash rate if you leave it on Hold too long.
2. Press TALK to hang up.
To place an outside call on Exclusive Hold:
1. Press HOLD twice.
- The line key flashes with a distinctive "wink-on" flash rate to show when it is on Hold or recalling.
2. Press TALK to hang up.
To pick up an outside call on Hold:
1. Press the flashing line key.
28 ◆ Chapter 2: Features
DSX Cordless Lite II Telephone User Guide