Table of Contents
Advertisement
Configuration
Preamble Type – The preamble is used to acquire the incoming
signal and synchronize the receiver. If all the clients in your
service area support the short preamble or can automatically set
the preamble type, then setting the preamble on the access point
to short can boost your throughput. (Options: Short & Long,
Long only; Default: Short & Long)
Transmit Power – Move the slider bar up and down to select an
appropriate transmission power. Lower power reduces
interference, higher power gives more range.
Quality of Service (QoS) – The QoS function allows you to
differentiate traffic types and provide high-priority forwarding
service for applications such as VoIP or gaming.
Check the Quality of Service checkbox to enable or disable this
function.
25
Advertisement
Table of Contents
