Chapter 3 Uninstall Guide
If the device installation is unsuccessful for any reason, the best way to solve the problem
may be to completely uninstall the device and its utility and repeat the installation procedure
again. Hereby, customers can use one of the following two methods to uninstall the Drivers
and Utility.
3.1 Through Control Panel
Follow the steps below in order to uninstall the Drivers and Utility:
1. Click on Start > Settings > Control Panel > Add or Remove Programs
2. You will then see the following window. Select the SMCWUSB-G2 Wireless Utility and
then click on Remove.
3. Click on the OK button to confirm the Uninstalling process.
4. The process will then remove the SMCWUSB-G2 Wireless Utility and the drivers from
your computer. Click on the Finish button and then unplug the SMCWUSB-G2.
Figure 3-1 Add or Remove Programs
Figure 3-2 Confirm the Uninstalling process.
11