SMC Networks WGBR14-N - annexe 1 Manual page 99

PPPoE, PPTP, L2TP Connection
Depending on whether the WAN connection is currently established, you can click
either the Connect to attempt to establish the WAN connection or the Disconnect to
break the WAN connection.
BigPond Connection
Depending on whether you are currently logged in to BigPond, you can click either
the BigPond Login to attempt to establish the WAN connection or the BigPond
Logout to break the WAN connection.
LAN Computers
This area of the screen continually updates to show all DHCP enabled computers
and devices connected to the LAN side of your router. The detection "range" is
limited to the address range as configured in DHCP Server. Computers that have an
address outside of this range will not show. If the DHCP Client (i.e. a computer
configured to "Automatically obtain an address") supplies a Host Name then that will
also be shown. Any computer or device that has a static IP address that lies within
the detection "range" may show, however its host name will not.
IGMP Multicast memberships
If IGMP is enabled, this area of the screen show all multicast groups of which any
LAN devices are members.
88