SMC Networks WGBR14-N - annexe 1 Manual page 32

Basic_Network Settings
Use this section to configure the internal network settings of your router. The IP Address that is
configured here is the IP Address that you use to access the Web-based management interface. If you
change the IP Address here, you may need to adjust your PC's network settings to access the
network again.
Router Settings
These are the settings of the LAN (Local Area Network) interface for the router. The router's
local network (LAN) settings are configured based on the IP Address and Subnet Mask
assigned in this section. The IP address is also used to access this Web-based management
interface. It is recommended that you use the default settings if you do not have an existing
network.
21