L2Tp - SMC Networks WBR14S-N User Manual

Barricade n draft 11n wireless 4-port broadband router
Hide thumbs Also See for WBR14S-N:
Table of Contents

Advertisement

WAN S
ETTINGS

L2TP

Enter the L2TP Account ID and Password assigned by your ISP in the
appropriate fields. If your ISP uses DHCP service, enable the Get IP by
DHCP. Then enter the L2TP Server Address provided by your ISP. Click
on the Disconnect after x minutes of no activity and then enter the idle
time for the Internet connection. This is the period of time for which the
connection to the Internet is maintained during inactivity. If your ISP
charges you by the minute, you should change the idle time out to one
minute.
Most ISPs provide a DNS server for speed and convenience. Since your
Service Provider may connect to the Internet with dynamic IP settings, it is
likely that the DNS server IP's are also provided dynamically. Clicking on
the Click here to enter your DNS Settings for DNS configuration. See
"DNS" on page 4-22.
Click Apply Changes to proceed, or Clear Changes to change your
settings
.
4-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smcwbr14s-n2Barricade smcwbr14s-n

Table of Contents