Wired Equivalent Privacy (Wep); Figure 41: Security Mode - Wep - SMC Networks WBR11S-N User Manual

The supported security mechanisms and their configuration parameters are
described in the following sections:
◆
◆
◆
◆
WEP provides a basic level of security, preventing unauthorized access to
W E
IRED QUIVALENT
the network, and encrypting data transmitted between wireless clients and
P (WEP)
RIVACY
an access point. WEP uses static shared keys (fixed-length hexadecimal or
alphanumeric strings) that are manually distributed to all clients that want
to use the network.
When you select to use WEP, be sure to define at least one static WEP key
for user authentication or data encryption. Also, be sure that the WEP
shared keys are the same for each client in the wireless network.

Figure 41: Security Mode - WEP

The following items are displayed in this section on this page:
Security Mode — Configures the WEP security mode used by clients.
When using WEP, be sure to define at least one static WEP key for the Mini
Broadband Router and all its clients. (Default: Disable)
◆
◆
OPEN, SHARED, WEP-AUTO — See
on page 76
WPA-PSK, WPA2-PSK, WPA-PSK_WPA2-PSK — See
Shared Key" on page 77
WPA, WPA2, WPA1_WPA2 — See
page 78
802.1X — See "IEEE 802.1X and RADIUS" on page 80
OPEN — Open-system authentication accepts any client attempting to
connect the Mini Broadband Router without verifying its identity. In this
mode the default data encryption type is "WEP."
SHARED — The shared-key security uses a WEP key to authenticate
clients connecting to the network and for data encryption.
– 76 –
| Wireless Configuration
C 7
HAPTER
WLAN Security

"Wired Equivalent Privacy (WEP)"

"WPA Pre-
"WPA Enterprise Mode" on