Current Filter Rules - SMC Networks WBR11S-N User Manual

Destination IP Address — Specifies the destination IP address to
◆
block or allow traffic from.
Source IP Address — Specifies the source IP address to block or allow
◆
traffic from.
Protocol — Specifies the destination port type, TCP, UDP or ICMP.
◆
(Default: None).
◆ Destination Port Range — Specifies the range of destination port to
block traffic from the specified LAN IP address from reaching.
Source Port Range — Specifies the range of source port to block
◆
traffic from the specified LAN IP address from reaching.
◆ Action — Specifies if traffic should be accepted or dropped. (Default:
Accept)
Comment — Enter a useful comment to help identify the filtering rules.
◆
The Current Filter Table displays the configured IP addresses and ports that
C F
URRENT ILTER
are permitted or denied access to and from the Mini Broadband Router.
R
ULES
Select — Selects a table entry.
◆
◆ MAC Address — Displays a MAC address to filter.
Destination IP Address — Displays the destination IP address.
◆
Source IP Address — Displays the source IP address.
◆
Protocol — Displays the destination port type.
◆
Destination Port Range — Displays the destination port range.
◆
Source Port Range — Displays the source port range.
◆
Action — Displays if the specified traffic is accepted or dropped.
◆
Comment — Displays a useful comment to identify the routing rules.
◆
C
HAPTER
– 102 –
| Firewall Configuration
9
MAC/IP/Port Filtering