SMC Networks 8648T Installation Manual page 69

Tigerswitch 10/100/1000 gigabit ethernet switch
Hide thumbs Also See for 8648T:
Table of Contents

Advertisement

10BASE-T
IEEE 802.3 specification for 10 Mbps Ethernet over two pairs of
Category 3 or better UTP cable.
100BASE-TX
IEEE 802.3u specification for 100 Mbps Fast Ethernet over two pairs of
Category 5 or better UTP cable.
1000BASE-SX
IEEE 802.3z specification for Gigabit Ethernet over two strands of
50/125 or 62.5/125 micron core fiber cable.
1000BASE-LX
IEEE 802.3z specification for Gigabit Ethernet over two strands of
50/125, 62.5/125 or 9/125 micron core fiber cable.
1000BASE-T
IEEE 802.3ab specification for Gigabit Ethernet over 100-ohm Category
5 or 5e twisted-pair cable (using all four wire pairs).
1000BASE-ZX
Specification for long-haul Gigabit Ethernet over two two strands of 9/
125 micron core fiber cable.
Auto-Negotiation
Signalling method allowing each node to select its optimum operational
mode (e.g., 10, 100, or 1000 Mbps and half or full duplex) based on the
capabilities of the node to which it is connected.
G
LOSSARY
Glossary-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tigerswitch smc8624tTigerswitch smc8648t

Table of Contents