Table of Contents
Advertisement
Label
WAN IP Settings
Type
Local IP Address
Remote IP Address
Subnet Mask
Unnumbered
Default Route
Add
Modify
Delete
Undo
ATM Setting
If the PVC uses PPPoE mode, click
parameters of this PPPoE PVC.
SMC7904BRA3 User Manual
The choices are Fixed IP and Use DHCP. If set Fixed IP, you should
enter the Local IP Address, Remote IP Address and Subnet Mask. If set
Use DHCP, your Modem is a DHCP client, the WAN IP is assigned by the
remote DHCP server.
This is the IP of WAN interface which is provided by your ISP.
This is the gateway IP which is provided by your ISP.
This is the Subnet Mask of the Local IP Address.
Select this checkbox to enable IP Unnumbered function.
After configuring the parameters of this page, click this button then a new
PVC is added into Current ATM VC Table.
Select a PVC in the Current ATM VC Table, and then modify the
parameters of this PVC. When you finish, click this button to apply the
change of this PVC.
Select a PVC in the Current ATM VC Table, and then click this button to
delete this PVC.
Click this button to begin configuring this screen afresh.
Click this button, the Fig 3.5.1-3 appears. In this page, you can configure
the QoS mode of ATM PVCs. For details, see the following pages.
Click this button, the following screens appears. In the page, you can
modify the parameters of PVCs.
, the Fig 3.5.1-2 appears. In this page, you can configure the
Fig 3.5.1-2
27
Description
Advertisement
Table of Contents
