CONFIGURATION AND MANAGEMENT
System Parameter Configuration
1. Highlight "System Configuration" in the Main Menu and
press <ENTER>. This will access the System Configuration
Screen (See below).
System Name
System Location
System Contact
Default Gateway
Subnet Mask
IP State
Send Ping
Return to Previous Menu
Use cursor keys to choose item.
Press <CTRL><N> to return to Main Menu
Figure 4-5. System Configuration Screen
2. Highlight "System Name" and press <ENTER> to assign a
name to identify the switch if the default entry (see above) is
not suitable. Press <ENTER> again to confirm entry.
3. Highlight "System Location" and press <ENTER> to input
the physical location of the switch. Press <ENTER> again to
confirm entry.
4. Highlight "System Contact" and press <ENTER> to specify
the party to contact in the event of a switch malfunction.
Press <ENTER> again to confirm entry.
5. Highlight "IP Address" and press <ENTER> to assign an IP
address to the switch. Press <ENTER> again to confirm
entry.
4-12
System Configuration
SMC TigerSwitch 100
MIS
SMC Technical Support Dept.
192.72.24.31
192.72.24.202
255.255.255.0
BootP When Needed
Press <ENTER> to confirm choice.